Mini Rotary table HV-3/4/5
Request a Quote
Out of Stock
Main features:
1. It is anadjustable height tailstock used when you need to support a long part held inthe rotary table- such ascutting a spline on a shaft.
2. Precisionmade of heavy cast iron, it has a basefor mounting tothe mill table with T- bolts.
3. Manufactured from Seasoned Grade Casting.
4. Adjustable toCenter Heights from 80 - 105mm
Nationwide
Delivery
Delivery
Pay via
M-Pesa
M-Pesa
100% Genuine
Products
Products
Genuine & Warranted
Sourced from trusted suppliers with manufacturer-backed warranty.
Fast Nationwide Delivery
Countrywide dispatch with reliable courier partners across Kenya.
Expert Support
Talk to our team on WhatsApp for specs, quotes and bulk orders.
Product Description
| Item | HV-3 | HV-4 | HV-5 |
| Table diameter(mm) | 76.2 | 110 | 127 |
| Morse taper of the center hole | \ | \ | MT2 |
| Height of center for Verti.mounting(mm) | 59 | 81.5 | 90 |
| Width of the T-slot(mm) | 8 | 12 | 12 |
| Adjacent angle of table T-slot | 90 | 120 | 120 |
| Width of the locating ket(mm) | 12 | 12 | 12 |
| Module of the worm gear | 1 | 1 | 1 |
| Transmission ratio of the worm gear | 1:36 | 0.091667 | 0.091667 |
| Graduation of the table | 360 | 360 | 360 |
| Rotating angle of table with one revolution of the worm | 10 | 5 | 5 |
| Max.bearing (kg) Horizontal | 100 | 150 | 200 |
| Max.bearing (kg) Vertical | 50 | 75 | 100 |
| Model | HV-3 | HV-4 | HV-5 |
| A | 98 | 145 | 155 |
| B | 78 | 114 | 127 |
| C | 59 | 85.5 | 90 |
| D | 76.2 | 1110 | 127 |
| E | 12 | 12 | 12 |
| G | \ | \ | \ |
| H | 83 | 85 | 85 |
| J | \ | \ | 15 |
| M | \ | \ | MT2 |
| N | 71 | 68 | 68 |
Ask about this product
Get an instant answer about specs, availability and more.
AI-generated — verify critical specs with sales.
Related Products
You may also like these
Recently Viewed
Pick up where you left off
